Dari permukaan peranti katil terapi Lampu Merah ke luar, kebanyakan pembungkusan profesional mengikut urutan lapisan yang serupa.
1. Perlindungan Permukaan
Lapisan pertama ialah filem pelindung yang digunakan terus pada panel akrilik, logam dicat, dan paparan skrin. Ia menghalang calar dan, dalam kes akrilik, mengurangkan risiko calar permukaan halus semasa pengendalian.
Amalan yang baik ialah menggunakan filem yang mengelupas dengan bersih tanpa meninggalkan sisa pelekat, kerana sisa pada panel lutsinar sukar ditanggalkan sebaik sahaja unit dipasang.
2. Kusyen Menyerap Kejutan
Seterusnya ialah lapisan kusyen. Bahan biasa termasuk busa polietilena, polietilena diperluas (EPE) papan, sisipan buih acuan, dan blok sudut buih.
Matlamatnya bukan semata-mata untuk menambah bahan lembut. Cushioning works only when it is matched to the weight of the device. Foam that is too soft compresses fully under a heavy cabin and stops absorbing energy; foam that is too firm transmits shock straight through. Red Light therapy bed manufacturers typically test the chosen foam against a drop or vibration profile before approving the design.
Corner protectors and edge boards are usually added at this stage, since corners take the highest concentrated loads.
3. Moisture and Corrosion Barrier
Electronics inside a sealed crate can still corrode if the container passes through humid climates or sits on a dock for weeks. Atas sebab ini, many shipments include a vapor barrier bag or a vapor corrosion inhibitor (VCI) film, along with desiccant packets sized to the internal volume.
The outer wrap is often stretch film or shrink wrap, which also keeps dust and water out and holds loose components together.
4. Structural Crate and Pallet Base
The structural layer carries the load. A well-built crate has a pallet base with enough cross members to prevent sagging, side panels that resist bowing, and a top cover that allows another crate to be stacked without pressing on the device.
Where stacking is expected, Red Light therapy bed manufacturers often print a maximum stack height and a “do not stack” warning if the unit cannot bear weight on its lid.
5. Securing, Sealing, and Labeling
The final step is immobilization and identification. Plastic or steel strapping holds the crate to the pallet, and the seams are sealed so that tampering or water ingress is visible on arrival.
Labels typically include the shipping marks, gross weight, dimensions, handling icons, and a serial number that matches the unit inside. Shock and tilt indicators are sometimes attached to the exterior; these small devices change color if the crate has been dropped or tipped beyond a set threshold, which becomes valuable evidence in a damage claim.